Pipe Rolling
Rolled pipe, cylinders, and concentric/eccentric cones in plate thicknesses up to 4 inches. Custom radii, end-to-end traceability, and weld-prep ready edges on every roll.
4
"
180
"
12
ft
4
Pipe Rolling at Steel Effects.
Our plate-rolling cell turns flat stock into pipe, cylinders, cones, and segmented sections at thicknesses up to 4 inches. From single-radius pre-bent ends to full-circle cylinders ready for the long-seam weld, every roll is checked against template before it leaves the machine.
What we work with
Capabilities
| Process | Capacity | Material | Best For |
|---|---|---|---|
| Cylinder Rolling | 4″ | 180″ wide | Tanks, vessels, stacks, ducts |
| Pipe Rolling | 3″ wall | 144″ long | Custom diameters, long seams |
| Cone Rolling | 2.5″ | 120″ wide | Concentric and eccentric cones |
| Pre-Bent Ends | 4″ | 180″ wide | Crimp ends prior to full roll |
How we run the job
Layout
Plate is squared and template-matched to your roll dimension and tolerance.
Pre-Bend
Leading and trailing edges are pre-bent to eliminate flat sections.
Roll
Three-roll pyramid passes shape the plate progressively to spec.
Verify
Inside-diameter and out-of-round are checked before release.
Quality & traceability
Every job is documented to the same ISO-aligned standard that runs across our floor — heat numbers transferred, procedures qualified, and inspection signed off before parts leave the dock.
Gallery
Talk to a project manager
Send us a drawing or describe what you need — we'll quote within 24 hours.