Robotic Welding
Six-axis robotic welding cells purpose-built for repeatable production. Programmed from your 3D model, fixtured for repeatability, and run two shifts a day.
4
6
500
lb
24
lb
Robotic Welding at Steel Effects.
When the volume justifies it, robotic welding gives you weld-after-weld consistency a manual cell can't match. We program from your 3D model, build the fixture, run a first-article qualification, and put the cell into production with documented cycle time.
What we work with
Capabilities
| Process | Capacity | Material | Best For |
|---|---|---|---|
| MIG (GMAW) | Up to 1″ | Carbon & stainless | Most production runs |
| Pulse MIG | Up to 1/2″ | Aluminum, thin gauge | Clean appearance welds |
| Tandem Wire | Up to 1.5″ | Carbon, heavy fab | High-deposition production |
| Multi-Pass | Up to 2″ | Carbon, low-alloy | Structural / pressure parts |
How we run the job
Program
Path planning from your 3D model — collision check, weld sequence, distortion strategy.
Fixture
Repeatable hold-downs and locators built and proofed against the model.
Qualify
First-article weld passed through visual and NDE before production release.
Run
Two-shift production with in-process audits and traceable cycle data.
Quality & traceability
Every job is documented to the same ISO-aligned standard that runs across our floor — heat numbers transferred, procedures qualified, and inspection signed off before parts leave the dock.
Gallery
Talk to a project manager
Send us a drawing or describe what you need — we'll quote within 24 hours.